迷你符合性设备，适用于小抓持器
• X-Y 及 α 角符合性[1]。
• 在方向 Z 为刚性。
• 一根空气导管连接至中央零位 [2]。
• 另一根空气导管可锁定任何偏移位置 [3]。
Mini compliance device, for small grippers
• X-Y and angle α compliance [1].
• Rigid in Z direction.
• One air lead to get the central zero psition [2].
• Another air lead to lock in any offset psition [3].
SB系列传感器接线盒
• 用于EOAT上传感器接线。• 可以转换PNP和NPN信号。• Is/Os可以是拉电流（PNP）、灌电流（NPN）或干触点。• 可以串联多个盒子来控制更多传感器。• 输入信号重复LED，便于排除故障（不适用于SB15）。• 提供应变消除装置和固定至型材的套件。
Connection boxes for series SB sensors• Used for sensor wiring on EOATs.• PNP and NPN signals can be converted.• Is/Os can be current sourcing (PNP), sinking (NPN) or dry contact
Several boxes can be connected in series to control more sensors
Input signal repetition LED for easy troubleshooting (not for SB15).
Provided with strain reliefs and kit for fastening to profles.
SBMS/SBMS-E - 从模块
每个单独的从模块均可以连接单个传感器。它由内部总线连接（由主模块提供）供电，并触发两个固态继电器的换向：基于传感器输出的常开触点和常闭触点。两个选择器可用于配置传感器信号输出（PNP/2线或NPN）和逻辑（正向或反向）。该模块还有两个用于诊断的LED指示灯。
Each individual slave module enables the connection of a singlesensor.
It is powered from the internal bus connection (provided by themaster module) and triggers the commutation of two solid staterelays: a NO contact and a NC contact based on sensor output.
Two selectors are available to conffgure sensor signal output(PNP/2 wires or NPN) and logic (direct or reverse).The module also has two LED indicators for diagnostics.
以上信息由专业从事节能真空泵的吉玛泰克于2024/12/27 16:55:14发布
转载请注明来源：http://laiwu.mf1288.com/jmtkzdh-2829274525.html
